info@yingselectric.com +86-15356229951

PLC Digital Input

Description

APB-22MTD DC12V-24V, 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports, 8 points NPN transistor output Q2、Q3 can be high-speed output ports, without LCDPLC

Generally, the small (low-end) PLC has functions such as logic operation, timing, counting, etc., and can be satisfied for devices that only require switching control. 

For systems with switching control and a small amount of analog control, an enhanced low-end PLC with A/D and D/A conversion units, plus arithmetic and data transfer functions can be selected. For the control is more complex, it is required to realize the functions of PID operation, closed-loop control, communication networking, etc., visual control of the size and complexity, and selection of mid-range or high-end PLC. However, medium and high-end PLCs are more expensive and are generally used in large-scale process control and distributed control systems.


Features of APB series PLC:

• User program capacity: 320 FBD, EEPROM saved;

• Lithium battery can be added to improve the clock holding time;

• High speed processing: up to 4 channels 10kHz high speed input and 2 channels 10kHz high speed output;

• Built-in MODBUS protocol, and can connected to SH300 (text display);

• New function blocks: pulse modulation PWM, pulse output PTO, trapezoidal acceleration/deceleration ACC, short message module SMS and analog calculation, etc.


Technical Parameters 

Model No.

APB-22MTD

APB-22MTD
     (without LCD)

DC12V-24V

14 points digital input(the first 12 points can be analog inputs); I4-I7 can be high-speed ports

8 points NPN transistor  output(Q2、Q3 can be high-speed output ports)

Surge Immunity

2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic Discharge (outer casing)

±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)

Ambient Temperature

-10℃~+55℃

Storage Temperature

-40℃~+70℃

Ambient Humidity

5%~95%RH

Degree of Protection

IP20(Non-waterproof)

Installation

Fixing with M3 screws or Standard DIN rail mounting

Dimensions (mm)

71*99*58.5(12 points); 126*99*58.5(22 points); 126*99*58.5(24 points)

Programming Language

FBD

Points

12 points/22 points/24 points/can support 7 I/O extension modules

Memory Capacity

320 FBDs

Filtering Duration of Input Signal

It can be set to improve the stability of signal

Real-time Clock

160h,can place a Li-ion battery if it is necessary

Password Protection

Multiple passwords protection

High-speed Operation

At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz

Analog Operation

At most 12 voltage 0-10V and 2 current 4-20mA analog inputs,
     and 2 analog outputs 0/4-20mA

Power Failure Protection

Yes

Simulate Monitoring

Yes

Communication Interface

TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces

Baud Rate

9600bps

Communication Protocol

MODBUS RTU

Power Supply

Rated Voltage

DC12-24V

Permissible Range

DC11-28V

 Digital Input

Input Type

NPN/PNP

Input Signal 0

DC0-5V

Input Signal 1

DC8.5-28V

Isolation

Non-isolation

Digital Output

Output Type

Transistor(NPN)

Rated Voltage

24VDC

Analog Input

Input Type

(DC0-10V)/8 inputs

(DC0-10V)/12 inputs

Analog Output

Isolation

Non-isolation

High-speed Operation

Input Type

4 inputs /10KHz

Support single-phase counter and two-phase counter

Output Type

2 outputs / 10KHZ

Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse

Dimensions
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.
图片2

                               Model

Dimension (mm)

12points CPU module

71*99*58.5

22points CPU module

126*99*58.5

24points CPU module

126*99*58.5

I/O extension module

126*99*58.5

SMS extension module

126*90*47.5

About company

YUMO MEANING:

A global quality electric organization
In order to obtain the highest quality, all products are produced according to international standards IEC60898, IEC947-2


YUMO VISION:
To be an enterprise lasting 150 years and beyond
To be an enterprise with a sales network all over 200 countries in the world.
To be the cooperative partner of General Electric

YUMO MISSION:
Better product, better service

YUMO BUSINESS PRINCIPLE
Cooperation, Sharing, Win-win

YUMO WORKING PRINCIPLE
Enjoy work, enjoy life.


FAQ:
1Q: How to order our product?  
 A: 1) Please tell us the model and quantity and other request you need.  
     2) We make the PI for you.
     3) After you confirm the PI, we arrange the order for you after receiving your payment.
     4) After the goods finished, we send the goods out to you and tell you the tracking number.
     5) We will track your goods until you receive the goods.

2Q:  What's your warranty?
A: One year.

3Q: What's your contact information?
A: Our address: Liushi town, Zhejiang province, China.

4Q: Where is your company located? How can I visit there?
A: Our factory is located in Wenzhou, China, about 2 hours ride from Wenzhou Airport. All our clients, from home and abroad, are warmly welcome to visit us!   

6Q: When can I get the price?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us by 0086-577-62791815.


About Us

Send Inquiry