APB-22MRD DC12V-24V, 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports, 8 points relay output, without LCD PLC
The hardware of the PLC controller itself adopts the building block structure, with motherboard, digital I/O template, analog I/O template, special positioning template, barcode identification template and other modules. Users can expand on the motherboard as needed. Or use the bus technology to equip the remote I/O slaves to get the desired number of I/Os.
While implementing various I/O controls, the PLC also has the ability to output analog voltage and digital pulses, enabling it to control a variety of servo motors, stepper motors, variable frequency motors, etc. that can receive these signals, plus a touch screen. Human interface support.
Features of APB series PLC:
• Main module: 12/22/24 points; Extension module: 22 points; With flexible extension function, up to 7 I/O extension modules can be configured，1 voice module, and 1 SMS module;
• Lithium battery can be added to improve the clock holding time;
• In DC12-24v state, the main module can include up to 12 channels of 0-10V voltage type analog input, 2 channels of 4-20mA current type analog input and 2 channels of 4-20mA analog output;
• High speed processing: up to 4 channels 10kHz high speed input and 2 channels 10kHz high speed output;
• Built-in MODBUS protocol, and can connected to SH300 (text display).
Technical Parameters
| Model No. |
APB-22MRD |
||
|
APB-22MRD |
DC12V-24V |
14 points digital input(the first 12 points can be analog inputs); I4-I7 can be high-speed ports |
8 points relay output |
|
Surge Immunity |
2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) |
||
|
Electrostatic Discharge (outer casing) |
±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) |
||
|
Ambient Temperature |
-10℃~+55℃ |
||
|
Storage Temperature |
-40℃~+70℃ |
||
|
Ambient Humidity |
5%~95%RH |
||
|
Degree of Protection |
IP20(Non-waterproof) |
||
|
Installation |
Fixing with M3 screws or Standard DIN rail mounting |
||
|
Dimensions (mm) |
71*99*58.5(12 points); 126*99*58.5(22 points); 126*99*58.5(24 points) |
||
|
Programming Language |
FBD |
||
|
Points |
12 points/22 points/24 points/can support 7 I/O extension modules |
||
|
Memory Capacity |
320 FBDs |
||
|
Filtering Duration of Input Signal |
It can be set to improve the stability of signal |
||
|
Real-time Clock |
160h,can place a Li-ion battery if it is necessary |
||
|
Password Protection |
Multiple passwords protection |
||
|
High-speed Operation |
At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz |
||
|
Analog Operation |
At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, |
||
|
Power Failure Protection |
Yes |
||
|
Simulate Monitoring |
Yes |
||
|
Communication Interface |
TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces |
||
|
Baud Rate |
9600bps |
||
|
Communication Protocol |
MODBUS RTU |
||
|
Power Supply |
|||
|
Rated Voltage |
DC12-24V |
||
|
Permissible Range |
DC11-28V |
||
|
Power Consumption |
3.5w |
||
|
Digital Input |
|||
|
Input Type |
NPN/PNP |
||
|
Input Signal 0 |
DC0-5V |
||
|
Input Signal 1 |
DC8.5-28V |
||
|
Isolation |
Non-isolation |
||
|
Digital Output |
|||
|
Output Type |
Relay |
||
|
Rated Voltage |
24VDC/220VAC |
||
|
Isolation Method |
Relay isolation |
||
|
Analog Output |
|||
|
Isolation |
Non-isolation |
||
|
High-speed Operation |
|||
|
Input Type |
4 inputs /10KHz |
||
|
Support single-phase counter and two-phase counter |
|||
Dimensions
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length. 
| Model |
Dimension (mm) |
|
12points CPU module |
71*99*58.5 |
|
22points CPU module |
126*99*58.5 |
|
24points CPU module |
126*99*58.5 |
|
I/O extension module |
126*99*58.5 |
|
SMS extension module |
126*90*47.5 |
FAQ:
1Q: How to order our product?
A: 1) Please tell us the model and quantity and other request you need.
2) We make the PI for you.
3) After you confirm the PI, we arrange the order for you after receiving your payment.
4) After the goods finished, we send the goods out to you and tell you the tracking number.
5) We will track your goods until you receive the goods.
2Q: What's your warranty?
A: One year.
3Q: What's your contact information?
A: Our address: Liushi town, Zhejiang province, China.
4Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
5Q: What's about MOQ?
A: First order MOQ=1pcs
6Q: If I want to release order, what's the payment method you accept?
A: We accept T/T, PayPal, Western union, L/C.
7Q: If I want to release order, what's the process?
A: Thanks. You can send us by email, we will reply within 24hrs.
8Q: Do you have a CE certificate?
A: Yes. For the products we exported, we could offer the CE for your Customs.
About Us
