APB-22MRDL DC12V-24V, 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports, 8 points relay output, with LCD PLC
Features
(1) The running speed is fast. Since the control of the PLC is controlled by the program, regardless of its reliability or operating speed, the relay logic control cannot be compared.
(2) The input/output function modules are complete. One of the biggest advantages of PLC is that for different field signals (such as DC or AC, switching, digital or analog, voltage or current, etc.), there are corresponding templates for industrial devices (such as buttons and switches). , sensor current transmitter, motor starter or control valve, etc.) are directly connected and connected to the CPU motherboard through the bus.
(3) Programming is easy. PLC programming mostly uses relay control ladder diagrams and command statements, the number of which is much less than the microcomputer instructions. In addition to medium and high-end PLCs, there are only about 16 small PLCs in general. Due to the simplicity of the ladder image, it is easy to master, easy to use, and even requires no computer expertise to program.
Features of APB series PLC:
• Main module: 12/22/24 points; Extension module: 22 points; With flexible extension function, up to 7 I/O extension modules can be configured,1 voice module, and 1SMS module;
• Lithium battery can be added to improve the clock holding time;
• In DC12-24v state, the main module can include up to 12 channels of 0-10V voltage type analog input, 2 channels of 4-20mA current type analog input and 2 channels of 4-20mA analog output;
• Built-in MODBUS protocol, and can connected to SH300 (text display);
• New function blocks: pulse modulation PWM, pulse output PTO, trapezoidal acceleration/deceleration ACC, short message module SMS and analog calculation, etc.
Technical Parameters
Model No. |
APB-22MRDL |
||
APB-22MRDL |
DC12V-24V |
14 points digital input(the first 12 points can be analog inputs); I4-I7 can be high-speed ports |
8 points relay output |
Surge Immunity |
2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) |
||
Electrostatic Discharge (outer casing) |
±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) |
||
Ambient Temperature |
-10℃~+55℃ |
||
Storage Temperature |
-40℃~+70℃ |
||
Ambient Humidity |
5%~95%RH |
||
Degree of Protection |
IP20(Non-waterproof) |
||
Installation |
Fixing with M3 screws or Standard DIN rail mounting |
||
Dimensions (mm) |
71*99*58.5(12 points); 126*99*58.5(22 points); 126*99*58.5(24 points) |
||
Programming Language |
FBD |
||
Points |
12 points/22 points/24 points/can support 7 I/O extension modules |
||
Memory Capacity |
320 FBDs |
||
Filtering Duration of Input Signal |
It can be set to improve the stability of signal |
||
Real-time Clock |
160h,can place a Li-ion battery if it is necessary |
||
Password Protection |
Multiple passwords protection |
||
High-speed Operation |
At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz |
||
Analog Operation |
At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, |
||
Power Failure Protection |
Yes |
||
Simulate Monitoring |
Yes |
||
Communication Interface |
TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces |
||
Baud Rate |
9600bps |
||
Communication Protocol |
MODBUS RTU |
||
Power Supply |
|||
Rated Voltage |
DC12-24V |
||
Permissible Range |
DC11-28V |
||
Power Consumption |
3.5w |
||
Digital Input |
|||
Input Type |
NPN/PNP |
||
Input Signal 0 |
DC0-5V |
||
Input Signal 1 |
DC8.5-28V |
||
Isolation |
Non-isolation |
||
Digital Output |
|||
Output Type |
Relay |
||
Rated Voltage |
24VDC/220VAC |
||
Isolation Method |
Relay isolation |
||
Analog Output |
|||
Isolation |
Non-isolation |
||
High-speed Operation |
|||
Input Type |
4 inputs /10KHz |
||
Support single-phase counter and two-phase counter |
Dimensions
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.
Model |
Dimension (mm) |
12points CPU module |
71*99*58.5 |
22points CPU module |
126*99*58.5 |
24points CPU module |
126*99*58.5 |
I/O extension module |
126*99*58.5 |
SMS extension module |
126*90*47.5 |
Our Services
1. Reply inquiry in 24 hours.
2. Please kindly inform us which items you are interested & the reasonable price will be provided to you upon receipt of your new inquiry ASAP.
3. Answer your question detailed.
4. Solved the problem with you during using our products.
5. Samples will be offered to you for our future cooperation.
FAQ:
1Q: Where is your company located? How can I visit there?
A: Our factory is located in Wenzhou, China, about 2 hours ride from Wenzhou Airport. All our clients, from home and abroad, are warmly welcome to visit us!
2Q: Do you have the testing equipment
A: We have prefect testing equipment, all the parts are 100% tested before they are sent out.
3Q: Punctual delivery time:
We carry out your order into our well-organized production schedule, and ensure your punctual delivery time. Production report before your order packed. Shipping notice and photos sent to you as soon as your order is shipped.
4Q: When can I get the price?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us by 0086-577-62791815.
5Q: Does your product have a factory inspection?
Every product we send is strictly factory inspection.
About Us