info@yingselectric.com +86-15356229951

Current Input PLC

APB-24MRDL DC12V-24V,2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports,6 points relay output + 2 analog outputs, with LCD PLC Features (1) The input/output function modules are complete. One of the biggest...

Description

APB-24MRDL DC12V-24V,2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports,6 points relay output + 2 analog outputs, with LCD PLC
Features
(1) The input/output function modules are complete. One of the biggest advantages of PLC is that for different field signals (such as DC or AC, switching, digital or analog, voltage or current, etc.), there are corresponding templates for industrial devices (such as buttons and switches). , sensor current transmitter, motor starter or control valve, etc.) are directly connected and connected to the CPU motherboard through the bus.
(2) Easy to install. Compared with computer systems, PLC installation does not require a dedicated machine room or strict shielding measures. When you use it, you only need to connect the detection device to the I/O interface terminal of the actuator and PLC correctly, and it can work normally.
(3) The running speed is fast. Since the control of the PLC is controlled by the program, regardless of its reliability or operating speed, the relay logic control cannot be compared.


Features of APB series PLC:
• Main module: 12/22/24 points; Extension module: 22 points; With flexible extension function, up to 7 I/O extension modules can be configured,1 voice module, and 1SMS module;
• User program capacity: 320 FBD, EEPROM saved;
• Lithium battery can be added to improve the clock holding time;
• In DC12-24v state, the main module can include up to 12 channels of 0-10V voltage type analog input, 2 channels of 4-20mA current type analog input and 2 channels of 4-20mA analog output;
• New function blocks: pulse modulation PWM, pulse output PTO, trapezoidal acceleration/deceleration ACC, short message module SMS and analog calculation, etc.


Technical Parameters

             Model No.

APB-24MRDL

APB-24MRDL
       (with LCD)

DC12V-24V

2 points for current input, and 14 points for digital input(the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports

6 points relay output+2 analog outputs

Surge Immunity

2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic Discharge (outer casing)

±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)

Ambient Temperature

-10℃~+55℃

Storage Temperature

-40℃~+70℃

Ambient Humidity

5%~95%RH

Degree of Protection

IP20(Non-waterproof)

Installation

Fixing with M3 screws or Standard DIN rail mounting

Dimensions (mm)

71*99*58.5(12 points); 126*99*58.5(22 points); 126*99*58.5(24 points)

Programming Language

FBD

Points

12 points/22 points/24 points/can support 7 I/O extension modules

Memory Capacity

320 FBDs

Filtering Duration of Input Signal

It can be set to improve the stability of signal

Real-time Clock

160h,can place a Li-ion battery if it is necessary

Password Protection

Multiple passwords protection

High-speed Operation

At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz

Analog Operation

At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mA

Power Failure Protection

Yes

Simulate Monitoring

Yes

Communication Interface

TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces

Baud Rate

9600bps

Communication Protocol

MODBUS RTU

Power Supply

Rated Voltage

DC12-24V

Permissible Range

DC11-28V

 Digital Input

Input Type

NPN/PNP

Input Signal 0

DC0-5V

Input Signal 1

DC8.5-28V

Isolation

Non-isolation

Digital Output

Output Type

Relay

Rated Voltage

24VDC/220VAC

Isolation Method

Relay isolation

Analog Input

Input Type

(4-20mA)/2 inputs

(DC0-10V)/12 inputs

Analog Output

Output Type

4-20mA/2inputs

A/D Conversion

12 bits

Isolation

Non-isolation

High-speed Operation

Input Type

4 inputs /10KHz

Support single-phase counter and two-phase counter

Dimensions
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.
图片2

                                  Model

Dimension (mm)

12points CPU module

71*99*58.5

22points CPU module

126*99*58.5

24points CPU module

126*99*58.5

I/O extension module

126*99*58.5

SMS extension module

126*90*47.5

About company

YUMO MEANING: 

A global quality electric organization
In order to obtain the highest quality, all products are produced according to international standards IEC60898, IEC947-2


YUMO VISION:
To be an enterprise lasting 150 years and beyond
To be an enterprise with a sales network all over 200 countries in the world.
To be the cooperative partner of General Electric

YUMO MISSION:
Better product, better service

YUMO BUSINESS PRINCIPLE
Cooperation, Sharing, Win-win

YUMO WORKING PRINCIPLE
Enjoy work, enjoy life.


FAQ:
1Q: How to order our product?  
A: 1) Please tell us the model and quantity and other request you need.  
    2) We make the PI for you.
    3) After you confirm the PI, we arrange the order for you after receiving your payment.
    4) After the goods finished, we send the goods out to you and tell you the tracking number.
    5) We will track your goods until you receive the goods.

2Q: What's your warranty?
A: One year.

3Q: Where is your company located? How can I visit there?
A: Our factory is located in Wenzhou, China, about 2 hours ride from Wenzhou Airport. All our clients, from home and abroad, are warmly welcome to visit us!   

4Q: Punctual delivery time?
A: We carry out your order into our well-organized production schedule, and ensure your punctual delivery time. Production report before your order packed. Shipping notice and photos sent to you as soon as your order is shipped.

5Q: Do you have the testing equipment?
A: We have prefect testing equipment, all the parts are 100% tested before they are sent out.


About Us

Hot Tags: current input PLC, China, suppliers, factory, customized, wholesale, buy, cheap, low price

Send Inquiry