info@yingselectric.com +86-15356229951

12VDC PLC with LCD

Description

APB-12MRDL DC12V-24V 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports, 4 points relay output with LCD PLC
Programmable logic controllers are divided into two types according to the structure: integral type and module type. According to the application environment, they are divided into two types: field installation and control room installation. According to the CPU word length, they are divided into 1 bit, 4 bits, 8 bits, 16 bits, 32 bits. Bit, 64 bit, etc. From the application point of view, it is usually possible to select the control function or the number of input and output points.
 The overall programmable logic controller has a fixed number of I/O points, so the user has less room for small control systems; the modular programmable logic controller provides multiple I/O cards or cards, so the user can It is more reasonable to select and configure the number of I/O points of the control system, and the function expansion is convenient and flexible, and is generally used for large and medium-sized control systems.


Features of APB series PLC:
•  Main module: 12/22/24 points; Extension module: 22 points; With flexible extension function, up to 7 I/O extension modules can be configured,1 voice module, and 1 SMS module;
•  User program capacity: 320 FBD, EEPROM saved;
•  In DC12-24v state, the main module can include up to 12 channels of 0-10V voltage type analog input, 2 channels of 4-20mA current type analog input and 2 channels of 4-20mA analog output;
•  High speed processing: up to 4 channels 10kHz high speed input and 2 channels 10kHz high speed output;
•  Built-in MODBUS protocol, and can connected to SH300 (text display).


Technical Parameters

              Model No.

APB-12MRDL

APB-12MRDL
       (with LCD)

DC12V-24V

8 points digital input(can be used as analog inputs); I4-I7 can be high-speed ports

4 points relay output

Surge Immunity

2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic Discharge (outer casing)

±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)

Ambient Temperature

-10℃~+55℃

Storage Temperature

-40℃~+70℃

Ambient Humidity

5%~95%RH

Degree of Protection

IP20(Non-waterproof)

Installation

Fixing with M3 screws or Standard DIN rail mounting

Dimensions (mm)

71*99*58.5(12 points); 126*99*58.5(22 points); 126*99*58.5(24 points)

Programming Language

FBD

Points

12 points/22 points/24 points/can support 7 I/O extension modules

Memory Capacity

320 FBDs

Filtering Duration of Input Signal

It can be set to improve the stability of signal

Real-time Clock

160h,can place a Li-ion battery if it is necessary

Password Protection

Multiple passwords protection

High-speed Operation

At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz

Analog Operation

At most 12 voltage 0-10V and 2 current 4-20mA analog inputs,
       and 2 analog outputs 0/4-20mA

Power Failure Protection

Yes

Simulate Monitoring

Yes

Communication Interface

TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces

Baud Rate

9600bps

Communication Protocol

MODBUS RTU

Power Supply

Rated Voltage

DC12-24V

Permissible Range

DC11-28V

Power Consumption

3.5w

 Digital Input

Input Type

NPN/PNP

Input Signal 0

DC0-5V

Input Signal 1

DC8.5-28V

Isolation

Non-isolation

Digital Output

Output Type

Relay

Rated Voltage

24VDC/220VAC

Isolation Method

Relay isolation

Analog Output

Isolation

Non-isolation

High-speed Operation

Input Type

4 inputs /10KHz

Support single-phase counter and two-phase counter

Dimensions 

Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.

                              Model

Dimension (mm)

12points CPU module

71*99*58.5

22points CPU module

126*99*58.5

24points CPU module

126*99*58.5

I/O extension module

126*99*58.5

SMS extension module

126*90*47.5

About company 

YUMO MEANING:

A global quality electric organization
In order to obtain the highest quality, all products are produced according to international standards IEC60898, IEC947-2


YUMO VISION:
To be an enterprise lasting 150 years and beyond
To be an enterprise with a sales network all over 200 countries in the world.
To be the cooperative partner of General Electric


YUMO MISSION:
Better product, better service

YUMO BUSINESS PRINCIPLE
Cooperation, Sharing, Win-win

YUMO WORKING PRINCIPLE
Enjoy work, enjoy life.


FAQ:
1Q: How to order our product?  
 A: 1) Please tell us the model and quantity and other request you need.  
     2) We make the PI for you.
     3) After you confirm the PI, we arrange the order for you after receiving your payment.
     4) After the goods finished, we send the goods out to you and tell you the tracking number.
     5) We will track your goods until you receive the goods.

2Q: About Company?
 A:YUMO established in 2007, and have got great success with its professional working team, we has been specialized in digital products for over 10 years, and mainly about HMI, PLC Encoder sensor  and other industrial control products.

3Q: How about the delivery?
A: It depends on the order details, and usually, we could support the delivery within 5-7 working days.

4Q: Where is your company located? How can I visit there?
A: Our factory is located in Wenzhou, China, about 2 hours ride from Wenzhou Airport. All our clients, from home and abroad, are warmly welcome to visit us!   

5Q: Does your product have a factory inspection?
Every product we send is strictly factory inspection.


About Us

Send Inquiry