Fast Processing Speed, Automatic Adaptation To Wavelength

Fast Processing Speed, Automatic Adaptation To Wavelength

Jul 17, 2019

The color-coded sensor refers to the detection of various labels, even if the background color has a slight difference in color, it can be detected, and the processing speed is fast. Automatically adapts to wavelengths and is capable of detecting small differences in grayscale values, regardless of the mixed color of the label and background.

Color-coded sensors are often used to detect spots on specific color patches or objects. Instead of measuring color directly, they are compared to non-color-coded areas. The color-coded sensor is actually a reverse device, the light source is mounted perpendicular to the target object, and the receiver is mounted at an acute angle to the object, so that it only detects the scattered light from the target object, thereby preventing the sensor from directly receiving the reflected light, and The beam is very narrowly focused. Both incandescent and monochromatic sources can be used for color code detection.

Incandescent-based sensors use a colored light source to detect color. This incandescent lamp emits light of various colors, including infrared light, so sensors using such light sources can detect small changes in color over a wide range. In addition, the detection circuit of the incandescent lamp sensor is usually very simple, so that an extremely fast response speed can be obtained. However, incandescent lamps do not allow vibration and prolonged use, so they are not suitable for applications with severe shock and vibration.

A color-coded sensor that uses a monochromatic light source (i.e., a green or red LED) is not a color-detecting principle in its principle. It detects by detecting the difference in the amount of reflection or absorption of the light beam from the surrounding material. Therefore, the color is identified strictly corresponding to the spectral components that are illuminated on the target.

Among the monochromatic light sources, the green LED (565 mm) and the red LED (660 mm) each have their own length. Green LEDs have a longer life than incandescent lamps and are more sensitive than red light sources over a wide range of colors. The red LED responds to a limited color combination, but its detection distance is farther than the green LED. Usually, the detection distance of the red light source sensor is 6-8 times that of the green light source sensor.