ISC3806-003G-100BZ3-5-24F 38mm 100PPR Solid Shaft Incremental Rotary Encoder
Common malfunctions
1. Absolute encoder battery voltage drop: This type of fault usually has a clear-cut alarm. In this case, the battery needs to be replaced. If the reference point position memory is lost, the reference point return operation must be performed.
2. The shield cable of the encoder cable is not connected or disconnected: this will introduce interference signals, make the waveform unstable, affect the accuracy of communication, and must ensure reliable welding and grounding of the shielded wire.
3. The encoder is loosely installed: this kind of fault will affect the position control accuracy, resulting in the position deviation of the stop and the movement is too poor, even if the servo system overload alarm is generated just after the start, please pay special attention.
4. Grating pollution This will cause the signal output to decrease. You must use a cotton wool dipped in absolute alcohol to gently wipe off the oil.
Features
Shaft diameter 6 mm, clamping flange, housing diameter 38 mm
Miniature size, easy assembling
2 orthogonal output channel (A&B) + index signal
Incremental encoder Applications
Measure the distance, automatic control, robot, X-Y labor, printing, curtained door, shoe machine, textile machine and etc.
◆Ordering Information
◆Note:
1.Please contact sales representative to confirm the correctness and availability of the part number
2. Line Driver is only available with 5V DC
3. Resolutions in grey background are NOT available with index width 1T
◆Technical Specifications
Electrical Specification | ||||
Output circuit | Open collector | Voltage output | Push pull output | Line driver output |
Power Vcc | 5~30 | 5~30 | 5±0.25 5~30 | 5±0.25 5~30 |
Current | ≤80mA | ≤80mA | ≤80mA | ≤150mA |
Load current | 40mA | 40mA | 40mA | 60mA |
High-level output | Min Vcc*70% | Min Vcc-2.5V | Min Vcc-1.5V | Min 3.4V |
Low-level output | Max 0.4V | Max 0.4V | Max 0.8V | Max 0.4V |
Rise Time Tr | Max 1us | Max 1us | Max 1us | Max 200ns |
Fall Time Tr | Max 1us | Max 1us | Max 1us | Max 200ns |
Max Responding Frequency | 200kHz | 200kHz | 200kHz | 200kHz |
Mechanical Specification | ||||
Max speed(r/min) | Starting Torque | Max. Shaft Loading | Shocking | Vibration |
6000 | <0.03Nm | Radial:15N, Axial:10N | 50G/11ms | 10G 10-2000Hz |
Rotor Inertia | Working Temperature | Storage Temperature | Protection Grade | Weight |
4*10-8Kgm2 | -30~90℃ | -35~95℃ | IP51 | 100g |
◆Connection Table
Signal | A | B | Z | Ā | B(-) | Z(-) | Vcc | GND |
Color | Green | White | Yellow | Brown | Grey | Orange | Red | Black |
◆Dimensions(mm)
About order
Conditions and terms
1. All of the products are brand new, top quality components, absolutely no used items
2 .The pictures are for reference only. Exact specifications should be obtained from the datasheet.
3. Prices, specifications, and availability of all items are subject to change without notice.
Payment Terms
1. We accept payments made by Western Union, TT, and PayPal.
2. Since you made the payment successfully, you can send us the Reference NO or MTCN.
Shipping
1. We will ship the items within 3-15 working days after the payment is reached.
2. We ship to you by Express, by sea, by air according to the PI.
3. Any import fees or charges are the buyer's responsibility.
Warranty
Warranty is available based on the following points:
1. Quality guaranteed for one year.
2. If the items you purchased from our company are not of perfected quality, that is they don't work electronically to manufacturers specifications, simply return them to us for replacement or refund.
3. If the items are defective, please notify us within 3 days of delivery.
4. Any items must be returned in their original condition to qualify for a refund or replacement.
5. The buyer is responsible for all the return shipping cost incurred.
About Us